污污的网站国产乱伦无码,日本一区二区免费在线观看,午夜福利k8经典电影网,欧美 亚洲 日韩 在线

觸控智能定硫儀是依據庫侖滴定法的原理（參見GB/T 214—1996）制成的。由單片機系統進行高溫爐的溫度控制和庫侖滴定結果的測量，由液晶顯示屏顯示，并向單片機系統發送相應控制命令，由單片機系統獨立完成相應工作。

Intelligent Touch Control Detector is made based on the principle of coulometric titration (refer to GB/T 214-1996). The temperature in the high temperature furnace is controlled by the SCM system, and the coulometric titration result is measured by the SCM system and then shown on the LCD. After receiving the corresponding control command, the SCM system will finish the corresponding work independently.

功能特點

1. 該系統用于測量煤、焦炭、石油等可燃物資的硫含量。

1. The system is used to measure the sulfur content in combustible materials such as coal, coke and petroleum.

2. 整個測試過程由單片機自動完成。

2. The whole test process is completed automatically by SCM.

3. 實驗過程中校正方便，直觀。

3. Calibration is convenient and intuitive in the experimental process.

4. 測量結果可長期保存，可查詢、打印。

4. The measurement results can be kept for a long time, and can be inquired and printed.

5. 系統工作溫度 用戶可通過軟件在600℃----1150℃之間選擇設定（測煤時為1050℃，測石油時用戶可選擇800℃）。

5. The user can set the working temperature of the system between 600℃ and 1150℃ by software (1050℃ for measurement of coal and 800℃ for measurement of petroleum).

6. 微機與單片機系統之間采用標準RS232串行接口，具有接線簡單、傳輸可靠、傳輸距離遠、故障率低等特點。

6. The microcomputer is connected with the SCM system by the standard RS232 SI, which is featured with simple wiring, reliable transmission, long transmission distance, low fault rate, etc.

7. 單片機系統負責控制高溫爐的溫度控制、測量數據的采集，并進行數據處理。

7. The SCM system is responsible for temperature control, collection of measurement data and data processing of high temperature furnace.

8. 本系統將高溫爐、磁力攪拌器、空氣凈化裝置、電解池、自動送樣機構、單片機控制線路合理地放置在同一機箱內，使整機系統美觀、體積小、系統的放置與連接方便、系統的操作與日常維護簡單等特點。

8. In this system, high temperature furnace, magnetic stirrer, air cleaning unit, electrolytic tank, automatic sample presentation mechanism and control circuit of SCM are reasonably placed in one case, which can achieve characteristics such as beautiful system, small volume, convenient placement and connection, and simple operation and routine maintenance.

技術參數

1. 硫的測量范圍： 0.1~10% 。

1. Measuring range of sulfur: 0.1~10%.

2. 載氣流量： 1000ml/min 。

2. Carrier gas flow: 1000ml/min.

3. 測硫時間：3—9min，儀器自動判斷終點。

3. determination time: 3-9min. The instrument automatically determines the end point.

4. 升溫速度：20~45min。

4. Rate of temperature increase: 20-45min.

5. 電源要求：單相交流電壓~220V  50Hz, 功率  2KW 。

5. Power requirements: Single-phase AC voltage: 220V, 50Hz; power: 2KW.

6. 準確度： 符合GB/T214-1996。

6. Accuracy: in accordance with GB / t214-1996.